Your Homes Most Expensive Appliances
When it comes to saving money on your residential electric bills, it can be helpful to understand your usage of the most expensive items to power in your home. The cost per kWh (kilowatt hour) of electricity in your area may vary, but this short article will give you a better understanding of what it takes to power the most demanding electric appliances in your home. Whether you run one appliance or several per day, they can all quickly add up to a costly electric bill for the month.
1. Air Conditioning
Depending on the size of your home and the age of your air conditioning unit, powering a central AC system can require a significant amount of electric power. An electrician can measure the current draw to assess how much electricity your system is using, but generally speaking, electric bills tend to spike during summer months due to the increased usage of residential air conditioning. On average, power usage for will add up to about 55 kWh for one day. Older units tend to draw more electric power than newer units due to reduced efficiency, which requires homeowners to pay extra attention when looking for an energy-efficient replacement for their systems. Even though a newer system with better efficiency ratings may cost more upfront, its lower electric bills will result in long-term savings and improved comfort levels.
2. Electric Furnace
Electric furnaces are a great alternative for home heating, and electricians can help you to install one if you’re considering the switch from traditional gas or oil furnaces. But before trying to understand electric furnace costs and installation processes, it’s important to get an idea of how much electricity powering electric furnaces typically consumes. In general, electric furnaces usually range between 10-50 kWh depending on their size and the equipment used – residential electric furnaces that are optimally sized tend to be more efficient and reduce electricity usage levels. Choosing an educated electrician to work with will help ensure that your electric furnace requirements are fulfilled in the most energy efficient way possible.
3. Clothes Dryer
The amount of electricity it takes to power an electric clothes dryer can vary depending on factors like the size of the electric dryer and the efficiency level. Generally, electric clothes dryers require an electrician to install at least a 240V circuit with 30 amps dedicated only to the dryer in residential settings. This will allow enough current draw for most electric clothes dryers that range from 4.5-6 kWh on average. As electric clothes dryers are considered large appliances, it is important to make sure they are wired properly and safely by a professional electrician to prevent home electrical hazards.
4. Electric Range/Oven
The amount of electricity it takes to power electric appliances will depend on several factors: the size of the appliance, how often it is used, and the electrician who installed it. Residential electric ranges require anywhere from 3 – 14 kWh while electric ovens typically need around 2.2 – 2.4 kwh. Whether learning how much electricity it takes to power electric range and oven or understanding other electric appliances efficiency levels in your home, consulting with a certified electrician can help you ensure your home’s energy needs are met without worrying about overloading circuits or wasting energy.
Most electricians recommend that residential households use low-flow dishwashers to reduce electric costs and conserve energy. An electrician will also be able to provide advice about the best type of electric diskwashers for a household’s needs. Roughly, it takes about 2 kWh of electricity on average to power one cycle in a typical residential dishwasher, which usually has a duty rating of around 700 watt-hours. Some models can use up to 3 kWh per cycle, depending on the temperature and load size. Of course, energy efficiency and cost savings can be improved by using low-temperature cycles or air-drying options found in many modern models.
Sansbury Electric is a small, locally owned business, with over 30 years of experience that have served Washington, D.C, Maryland, Virginia, and Delaware since 2010. Our team is known for our high-quality electrical services with a team that delivers a client focused experience. Honesty, ease for the client, friendliness, and an on-time and on-budget experience are the core values that drive our day-to-day interactions.